August 7, 2020

DENNARD 2060 PDF

Dome Camera Installation Manual Weatherproof and Indoor versions www. Contents Introduction. Menu System Manual. Page 4 of 1. THE DENNARD TYPE DOME CAMERA. The Dennard Dome Camera is a precision unit, offering a wide. The Dedicated Micros Camera has a number of features which can be selected by the System. Supervisor when the dome is installed. Any of these can be.

Author: Kabei Fenos
Country: Lebanon
Language: English (Spanish)
Genre: Automotive
Published (Last): 10 November 2015
Pages: 174
PDF File Size: 11.91 Mb
ePub File Size: 3.39 Mb
ISBN: 854-5-74916-395-3
Downloads: 3897
Price: Free* [*Free Regsitration Required]
Uploader: Vujind

Introduction The Dedicated Micros camera is a precision unit, offering a wide variable speed range, together with a large pre-set memory for positions, tours and alarm responses.

Dennard 2060 PTZ Speed Dome Camera 36 x Optical Zoom with Swan Neck (Fully re-furbished)

Operation and Programming Manual Note: Mounting brackets may have been ordered and delivered separately. Attach safety bond to a suitable secure position in the ceiling void.

Always support dome drnnard bond prior to mating connector B. Weight of dome should be supported by bond ensuring no stress is placed on centre connector B at any time. Attach bond to a suitable secure position in the ceiling dennarc. Always support dome with bond prior to mating connector.

The weight of dome should be supported by bond ensuring no stress is placed on centre connector at any time. Attach the mounting disc B to the ceiling in the chosen position and fix 4x M6x16 socket head cap screws supplied into the bushes C as shown below. C into the keyhole slots on the base of the dome F enclosure. Twist once located to secure, then tighten screw heads C to secure the dome enclosure to the mounting disk.

Ensure the safety bond is fitted. Locating the dome on the corner of dejnard building will give an increased area of surveillance. For this application, Dedicated Micros offer an optional corner bracket, DM to adapt the standard wall bracket. Thread the cable from the bracket throught the dennadd entry hole in the bottom of the bracket casting, then fit the bracket shown above left. Secure the mounting disc with 4 x supplied off M6 socket button head fixings D.

Fit the supplied safety bond E to an attachment point in the ceiling. Dennarc the dome to the bracket flange ensuring head of screws pass through the keyhole slots. Twist to locate and lock. Finally secure the plastic cover to the metal pins on the bracket flange C. M6x20mm Dennaed Screw pass through the keyhole slots. Finally secure the plastic cover to the metal pins on the bracket flange.

  KLM CLINICALLY ORIENTED ANATOMY PDF

Snap fit dennarrd tile mount bezel E. This replaces the standard bezel F provided with the camera. Discard the standard bezel F. Electrical Connections – Weatherproof Dome The Dedicated Micros external connections are via an IP66 Amphenol connector with 3 metre composite cable flying lead that can be extended to 30 metres max.

This lead should be connected to the boxed P. The DM Dome can be controlled by one of three methods. The configuration drawings show the three 20600 arrangements. DM with rx domes are delivered with the address switches set at The location of the switches is also shown.

This operation should be carried out in an office type environment to avoid ingress of moist air. When reassembling the dome, check the hemisphere sealing gasket is in place and that the hemisphere retaining screws are retightened to avoid water ingress. Remove and retain the four screws securing the shield to the head and lift off the shield.

This operation should be carried out in an clean, dry environment. Scan across the table to identify the values for the blue and yellow switches.

Dedicated Micros Dennard 2060 Dome with 36x optical zoom

Locate SW3 on the main PCB adjacent to the mounted connector attaching the daughter board housing the yellow and blue address switches. Termination All Dedicated Micros domes are fitted with a termination switch, shown above. No joystick dead band recognized as joystick was off centre during powerup. Dennars Reboot the controller with the joystick self centred. Reset the Dome software reset Open the Technician Menu see Operation and Programming denard for details on accessing the menu.

The single letter in the middle of the reference indicates the supported camera, refer to the table below for more information.

Appendix A DM Fixed Attitude Dome Camera – Setup Telemetry cameras can be positioned remotely, fixed atitude cameras require manual adjustment to position the camera. Framing the desired camera image will be easier using a local monitor. To Frame the image from a Fixed attitude camera; The connector mates with the dome as shown in the image below. This offers a range of features which are described below. Control Switches – Indoor Dome Also See for Dehnard manual – pages Quick start manual – 32 pages System manual – pages.

Page of 36 Go. Page 32 – Dm dennarx attitude dome camera – ‘zo Table eennard Contents Add to my manuals Add. Dedicated Micros Operation Manual pages. Table Of Contents Troubleshooting Introduction Introduction The Dedicated Micros camera is dennrad precision unit, offering a wide variable speed range, together with a large pre-set memory for positions, tours and alarm responses. Mounting Configurations – Indoor Note: Safety Bond – Weatherproof Dome Attach safety bond to a suitable secure position in the ceiling void.

  ASTM E415-08 PDF

Safety Bond – Indoor Dome Attach bond to a suitable secure position in the ceiling void. Ceiling Mounting – Weatherproof Dome Attach the mounting disc B to the ceiling in the chosen position and fix 4x M6x16 socket head cap screws supplied into the bushes C as shown below.

Page 11 C into the keyhole slots on the base of the dome F enclosure. dehnard

Dedicated Mircros Dennard Installation manual |

Wall Mounting Bracket Note: Tile Mounting – Weatherproof Dome mm mm Attach the mounting disc A to the dome in the chosen position and use 3 of the existing M4 dome hd screws to attach the hemisphere to the dome. Page 14 Secure the mounting disc with 4 x supplied off M6 socket button head fixings D.

Dome Mounting – Weatherproof Dome Lift the dome to the bracket flange ensuring head of screws pass through the keyhole slots. Electrical Connections – Weatherproof Dome Electrical Connections – Weatherproof Dome The Dedicated Micros external connections are via an IP66 Amphenol connector with 3 metre composite cable flying lead that can be extended to 30 metres max.

Control Switches – Weatherproof Dome The location of the switches is also shown. Control Switches – Indoor Dome Remove and retain the four screws securing the shield to the head and lift off the shield. Up The Coax Configuration Scan across the table to identify the values for the blue and yellow switches.

Extended Rs Addressing Locate SW3 on the main PCB adjacent to the mounted connector attaching the daughter board housing the yellow and blue address switches. Page 26 Termination All Dedicated Micros domes are fitted with a termination switch, shown above. Troubleshooting No joystick dead band recognized as joystick was off centre during powerup. Software Version The single letter in the middle of the reference indicates the supported camera, refer to the table below for more information.

Page 35 Control Switches – Indoor Dome Comments to this Manuals Your Name. Enter text from picture: By pressing ‘print’ button you will print only current page. To print the manual completely, please, download it.

Don’t show me this message again. Got it, continue to print. Don’t have an denhard